2 Front-Panel Overview
68 Keysight 34970A/34972A User’s Guide
To Configure the Remote Interface - 34970A
The 34970A is shipped with both an GPIB (IEEE-488) interface and an RS-232
interface. Only one interface can be enabled at a time. The GPIB interface is
selected when the instrument is shipped from the factory.
1 Select the GPIB interface.
2 Select the GPIB address.
You can set the instrument’s address to any value between 0 and 30. The
factory setting is address “9”.
3 Save the change and exit the menu.
GPIB Configuration
GPIB / 488
ADDRESS 09
Your computer’s GPIB interface card has its own address. Be sure to avoid using
the computer’s address for any instrument on the interface bus. Keysight’s GPIB
interface cards generally use address “21”.
To Next Page
Loading...
