Features and Functions 4
Keysight 34970A/34972A User’s Guide 183
SCPI commands
This section concentrates on the features available from the front panel; you can
also control the mass memory subsystem with the following SCPI commands:
– MMEMory:FORMat:READing:CSEParator <column_separator>
– MMEMory:FORMat:READing:CSEParator?
– MMEMory:FORMat:READing:RLIMit <row_limit>
– MMEMory:FORMat:READing:RLIMit?
– MMEMory:LOG[:ENABle] <state>
– MMEMory:LOG[:ENABle]?
– MMEMory:EXPort?
– MMEMory:IMPort:CONFiguration? "<configuration_file>"
– MMEMory:IMPort:CATalog?
For more information on the SCPI commands available to program the instrument
over the remote interface, see the MMEMory commands in the Keysight 34970A/
34972A Programmer’s Reference Help.
Folder and file structure
Folder description
Each saved scan will be stored in a top-level folder named:
/34972A/data/[instrument_SN]/[yyyymmdd_hhmmssmmm]
The square brackets ( [ ] ) are not actually part of the directory name, and the
yyyymmdd_hhmmssmmm is a timestamp indicating the approximate start of the
scan. The format is year (yyyy), month (mm), day (dd), underscore (_), hours (hh),
minutes (mm), seconds (ss), and milliseconds (mmm).
For example, the folder named:
/34972A/data/MY00012345/20091210_134523123
would indicate a scan on instrument number MY00012345 that started
approximately 23.123 seconds after 1:45 pm (13:45) on December 10, 2009.
To Next Page
Loading...
