Features and Functions 4
Keysight 34970A/34972A User’s Guide 207
Multiplexer Module Default Settings
The table below shows the default settings for each measurement function on the
multiplexer modules. When you configure a channel for a particular function,
these are the default settings.
Temperature Measurements
Temperature Units
Integration Time
Display Resolution
Thermocouple Type
Open T/C Detection
Reference Junction Source
RTD Type
RTD Reference Resistance
Thermistor Type
Channel Delay
Default Setting
°C
1 PLC
0.1°C
Type J
Off
Internal
α= 0.00385
R
o
= 100Ω
5 kΩ
Automatic Delay
Voltage Measurements
Range
Resolution
Integration Time
Input Resistance
AC Low Frequency Filter
Channel Delay
Default Setting
Autorange
5½ digits
1 PLC
10 MΩ (fixed for all DCV ranges)
20 Hz (medium)
Automatic Delay
Resistance Measurements
Range
Resolution
Integration Time
Offset Compensation
Channel Delay
Default Setting
Autorange
5½ digits
1 PLC
Off
Automatic Delay
To Next Page
Loading...
