6 Application Programs
254 Keysight 34970A/34972A User’s Guide
Application Programs
This chapter contains several example programs to help you develop programs for
your specific measurement application. See the Keysight 34970A/34972A
Programmer’s Reference Help for details on the SCPI language for the instrument.
The examples in this chapter have been tested on a PC running on Windows 95.
The examples are written for use over the GPIB interface and require a VISA
(Virtual Instrument Software Architecture) library for use with your GPIB interface
card in your PC. You will want to make sure that you have the visa32.dll file in your
c:\windows\system directory for the examples to work properly.
These programs were written for the 34970A, but other than the connectivity, the
principles and code should generally apply to the 34972A as well.
For programs specific to the 34972A, see the product page at
www.keysight.com/find/34972A
The GPIB (IEEE-488) address is set to “09” when the instrument is shipped from
the factory. The examples in this chapter assume an GPIB address of 09.
To Next Page
Loading...
