Features and Functions 4
Keysight 34970A/34972A User’s Guide 187
USB Drive Front Panel - 34972A
This section gives information on configuring the USB drive with the front panel.
For more information about using the USB drive, see “Mass Memory (USB)
Subsystem - 34972A” on page 181. For more information on the SCPI commands
available to configure the USB drive over the remote interface, see the MMEMory
Subsystem in hte Keysight 34970A/34972A Programmer’s Reference Help.
Setting up automatic logging
You can set up the USB drive for automatic logging of readings.
Front-Panel Operation:
LOG READINGS AUTO/OFF
Exporting readings
You can export readings from reading memory onto the USB drive.
– Front-Panel Operation:
EXPORT READNG YES/NO
Formatting readings
You can control how readings are formatted on the USB drive. In particular, you
can choose whether the readings are stored in one large file (
ROWS/FILE:AUTO)
or in a series of files with 64K - 1 rows per file (
ROWS/FILE:64K)
. You can also
choose whether the files are formatted with a tab, comma or semicolon between
columns.
– Front-Panel Operation:
FORMAT READNG ROWS/FILE:AUTO
FORMAT READNG ROWS/FILE:64K
FORMAT READNG SEP: TAB
FORMAT READNG SEP: COMMA
FORMAT READNG SEP: SEMICOLON
To Next Page
Loading...
