4 Features and Functions
196 Keysight 34970A/34972A User’s Guide
Setting the subnet mask
You can set the subnet mask for your LAN connection. This menu option assigns a
Subnet Mask for the instrument. The instrument uses the Subnet Mask to
determine whether a client IP address is on the same local subnet. You must
disable DHCP in order to set this on the front panel.
When a client IP address is on a different subnet, all packets must be sent to the
Default Gateway. Contact your network administrator to determine whether
subnetting is being used and for the correct Subnet Mask.
– Front-Panel Operation:
SUBNET MASK
Setting the default gateway
You can set the default gateway for your LAN connection. Contact your network
administrator to determine whether subnetting is being used and for the correct
address. If DHCP is enabled, DHCP will auto-assign the gateway. This
auto-assigned gateway takes precedence over the static gateway assigned with
this menu option. You must disable DHCP in order to set this on the front panel.
– Front-Panel Operation:
DEF GATEWAY
Setting the DNS server
You can set the address of the DNS server for your LAN connection.Contact your
network administrator to determine whether DNS is being used and for the
correct address. If DHCP is available and enabled, DHCP will auto-assign the DNS
address. This auto-assigned DNS address takes precedence over the static DNS
address assigned with this menu option. You must disable DHCP in order to set
this on the front panel.
– Front-Panel Operation:
DNS SERVER
To Next Page
Loading...
