*4W Sense Channels are paired to Channel (n-10).
Refer to the diagrams on page 38 to connect wiring to the module.
Maximum Input Voltage: 300 V (CAT 1)
Maximum Input Current: 1 A
Maximum Switching Power: 50 W
Not Used
Not Used
WIRING LOG Slot Number: 100 200 300
Ch Name Function Comments
01
02
03
04
05
06
07
08
09
10
H COM
L COM
11*
12*
13*
14*
15*
16*
17*
18*
19*
20*
H COM
L COM
Current Channels Only:
21
22
I COM
L COM
6mm
20 AWG Typical
WARNING: To prevent electrical shock, use only wire
that is rated for the highest voltage applied to any channel.
Before removing a module cover, turn off all power to external
devices connected to the module.
To Next Page
Loading...
