5 Error Messages
242 Keysight 34970A/34972A User’s Guide
403 Mass storage error: failed to close file
The file was not closed on the USB drive.
404 Mass storage error: file write error
The file data was not written on the USB drive.
405 Mass storage error: file read error
File data was not read from the USB drive.
406 Mass storage error: file write error
File data was not flushed to the USB drive.
407 Mass storage error: failed to remove file
The instrument was unable unable to delete the file on the USB drive.
408 Mass storage error: failed to create directory
The instrument was unable to create the directory on the USB drive.
409 Mass storage error: failed to remove directory
The instrument was unable to remove the directory on the USB drive.
410 Not enough disk space
The external USB drive is full.
411 No external disk detected
The operation requires a USB drive, which is not detected.
412 External disk has been detached
The external USB drive has been unplugged.
413 File already exists
The instrument was unable to create new file because a file with that name
already exists on the USB drive.
414 Directory already exists
The instrument was unable to create new directory because a directory with that
name already exists on the USB drive.
415 File not found
The file does not exist on the USB drive.
416 Path not found
The directory does not exist on the USB drive.
417 File not opened for writing
The instrument failed to open the file for writing on the USB drive.
To Next Page
Loading...
