1Quick Start
46 Keysight 34970A/34972A User’s Guide
1 Select the channel to copy the configuration from.
Turn the knob until the desired channel is shown on the right side of
front-panel display. For this example, let’s copy the configuration from channel
103.
2 Select the copy function.
Use the knob to scroll through the measurement choices until you see COPY
CONFIG. When you press to make your selection, the menu
automatically guides you to the next step.
3 Select the channel to copy the configuration to.
Turn the knob until the desired channel is shown on the right side of
front-panel display. For this example, let’s copy the configuration to channel
105.
4 Copy the channel configuration to the selected channel.
PASTE TO
To copy the same configuration to other channels, repeat this procedure.
To Next Page
Loading...
