2 Front-Panel Overview
72 Keysight 34970A/34972A User’s Guide
1 Select the USB interface.
2 Enable or disable the USB interface.
Select either USB ENABLED or USB DISABLED.
3 View the USB ID String
The instrument will display its USB identification (USB ID) string. This is helpful
in identifying the device on the USB network. Use the left and right arrows
above the knob to view the full string.
4 Save the changes and exit the menu.
USB Configuration
USB INTERFACE
USB ENABLED
USB0::2391::8199::MY01023529::0::INSTR
To Next Page
Loading...
