Keysight 53230A - Figure 5-2 Trigger and Gate Cycle - Gating (ContD)

Triggering and Gating 5
Keysight 53220A/53230A User’s Guide 159
Figure 5-2 Trigger and gate cycle - gating (cont’d)
Gate Delay
Gate Start Source
Gate Source
Gate Slope
Gate Stop Source
IMMediate
ADVanced
SENSe:FREQuency:GATE:SOURce
SENSe:TOTalize:GATE:SOURce
SENSe:TINTerval:GATE:SOURce
SENSe:FREQuency:GATE:TIME
SENSe:TOTalize:GATE:TIME
SENSe:TINTerval:GATE:SOURce IMMediate
IMMediate
EXTernal
SENSe:GATE:STARt:SOURce
SENSe:GATE:STARt:SLOPe
SENSe:GATE:STARt:DELay:SOURce
SENSe:GATE:STARt:DELay:EVENts
(input channel)
IMMediate
SENSe:GATE:STOP:SOURce
IMMediate
Gate Slope
SENSe:GATE:STOP:SLOPe
Gate Stop (closed)
Gate Start (open)
(delay disabled)
(from Triggered State)
EXTernal
Gate Start (open)
Gate Stop (closed)
(to SAMPle COUNt reached?)
auto gate extension
(measurement completes on next edge of
input signal after gate is closed)
(measurement complete)
(frequency and period measurements)
(internal)
TIME
SENSe:FREQuency:GATE:POLarity
SENSe:TOTalize:GATE:POLarity
SENSe:TINTerval:GATE:POLarity
EXTernal
Gate Start (open)
Gate Stop (closed)
INPut[1]* | INPut2 *
* not available with time interval
INPut[{1|2}]:LEVel[{1|2}][:ABSolute]
INPut[1] | INPut2 *
SENSe:GATE:EXTernal:SOURce
External Gate Source
BNC
INPut[1]* | INPut2 *
SENSe:GATE:EXTernal:SOURce
External Gate Source
EXTernal /
(internal)
SENSe:GATE:STARt:DELay:TIME
Gate In/Out BNC Disable
OUTPut:STATe OFF
(for all EXTernal Sources)
Gate Stop Hold Off
SENSe:GATE:STOP:HOLDoff:EVENts
(input channel)
SENSe:GATE:STOP:HOLDoff:SOURce
IMMediate
(holdoff disabled)
SENSe:GATE:STOP:HOLDoff:TIME
Gate stop source does not apply to rise/fall
time, duty cycle, pulse width, phase, and
single-period measurements
shown first sequentially
set last programmatically