2 53220A/53230A Software Installation and Interface Configuration
48 Keysight 53220A/53230A User’s Guide
Software Requirements
The environments available to program the 53220A/53230A are dependent upon
the IO libraries and drivers installed. The IO software included with the 53220A/
53230A is contained on the following CD:
– Keysight Automation-Ready CD: Keysight IO Libraries Suite
The IVI-C and IVI-COM drivers for the instrument can be found on the web at:
www.keysight.com/find/53220A or www.keysight.com/find/53230A
Table 2-1 summarizes the environments, IO driver recommendations, and the
location (media) where specific drivers and libraries can be found.
Table 2-1 53220A/53230A development environments and drivers
Interface Development Environment IO Driver Recommendations
LAN
Web-enabled instrument interface
> SCPI Command Interface window
Java™ -enabled Web browser
(available from www.java.com)
LAN, GPIB, USB
Keysight Connection Expert
> Interactive IO window
Keysight IO Libraries CD*
LAN, GPIB, USB
Microsoft® Visual Studio®
> Visual C++
VISA - Keysight IO Libraries CD*
IVI-C - Web
LAN, GPIB, USB
Microsoft® Visual Studio®
> Visual Basic
VISA-COM - Keysight IO Libraries*
IVI-COM -Web
LAN, GPIB, USB
Microsoft® Visual Studio® .NET
> C#, C++, Visual Basic
IVI-COM - Web
LAN, GPIB, USB Keysight VEE IVI-COM -Web
LAN, GPIB, USB National Instruments LabVIEW™
53220A/53230A native mode driver
IVI-C - Web
LAN, GPIB, USB National Instruments LabWindows/CVI IVI-C - Web
* Visit www.keysight.com for the latest version of the Keysight IO Libraries Suite.
To Next Page
Loading...
