53220A/53230A Measurements 3
Keysight 53220A/53230A User’s Guide 93
Frequency and Period Measurements
The 53220A/53230A measurements covered in this section include frequency,
frequency ratio, and period.
Frequency
A standard frequency measurement is shown in Figure 3-2.
Figure 3-2 Standard frequency measurement.
The SCPI commands listed in these examples are provided as an introduction to
how frequency measurements are made. Commands may be included even
though they specify default values - but which should be considered when
modifying the examples for actual use. Refer to the ‘Programmer’s Reference’ on
the Keysight 53210A/53220A/53230A Product Reference CD for additional
information.
+ width
-width
t
r
t
f
frequency
10
90
To Next Page
Loading...
