53220A/53230A Software Installation and Interface Configuration 2
Keysight 53220A/53230A User’s Guide 73
Figure 2-10 Specifying the address or host name.
The firmware update takes a few moments to complete. The 53220A/53230A will
reboot once the update is complete.
Following a firmware update, Keysight Connection Expert (if running) may report
that the 53220A/53230A configuration has changed. This is represented by a
yellow triangle and an exclamation point (!) next to the updated instrument.
Select the instrument name, select ‘Change Properties’, and then select either ‘Test
Connection’ or ‘Identify Instrument’ to update Connection Expert.
To Next Page
Loading...
