53220A/53230A Software Installation and Interface Configuration 2
Keysight 53220A/53230A User’s Guide 53
Figure 2-2 The Web UI SCPI command interface.
Any command in the counter’s SCPI command set can be sent to the instrument.
Query commands which include ‘?’ in the syntax return data and can be sent by
selecting Send & Read after the command is entered. Commands which do not
return data are sent using Send Command.
Changing LAN settings and using password protection
The Network Configuration Page icon provides access to the counter’s LAN
settings, and enables you to set a password to prevent unauthorized access to the
Web instrument interface. Select Modify Configuration to change and save settings.
To Next Page
Loading...
