Keysight 53230A - Page 289

53220A/53230A Error Messages A
Keysight 53220A/53230A User’s Guide 289
-257
File name error;
invalid character in name
The file or folder name contains an invalid character
(\ / : * ? “ < > |).
-257
File name error;
path too long
The combination of the directory path and file name is greater than 239
characters.
-257
File name error;
not a folder name
The folder name specified in the memory operation is the name of an
existing file.
-257
File name error;
path is a folder name
The file name specified in the memory operation is the name of an
existing folder.
-257
File name error;
file or folder already exists
The name specified when creating a file or folder already exists in
internal flash memory or on the USB device.
-257
File name error;
relative path not allowed
The “..” convention cannot be used to indicate the parent folder.
-257
File name error;
folder is default folder
The folder presently specified as the default/current folder
(MMEMory:CDIRectory) cannot be deleted.
-257
File name error;
path name missing
The folder or file operation specified does not include a valid path name.
-257
File name error;
drive name missing or
not recognized
The drive name is missing or is invalid in the path specified. Valid drive
names are INT (internal flash memory) and USB (external USB memory
device).
-257
File name error;
access denied
The folder or file operation requested cannot be performed on a
protected of system file.
-257
File name error;
file too large
The file uploaded to the counter is greater than 1 GByte.
-257
File name error;
folder not empty
When deleting a folder from an I/O (remote) interface, the folder must
be empty - no sub-folders or files. Un-empty folders CAN be deleted
from the front panel.
-257
File name error;
unknown file extension
Depending on the memory operation and file type, valid file extensions
are .csv, .dat, .sta, and .prf.
Table A-1 53220A/53230A error message descriptions. (continued)
Code Message Description