53220A/53230A Software Installation and Interface Configuration 2
Keysight 53220A/53230A User’s Guide 61
If there is not a DHCP server on the network, the 53220A/53230A will
automatically determine the address to use. The address will be in the range
169.254.1.1 to 169.254.255.255.
Host names
The 53220A/53230A has a default host name. The format of the host name is:
A-53220A-nnnnn (Keysight 53220A)
A-53230A-nnnnn (Keysight 53230A)
where ‘nnnnn’ are the last five digits of the instrument’s serial number.
The instrument host name is reported by Connection Expert for network servers
that support Dynamic Domain Name Service (DNS). For network servers that do
not support Dynamic DNS, only the IP address is reported.
Instrument addressing During programming, the 53220A/53230A is accessed
through its address string which consists of an IP address:
TCPIP0::169.254.2.30::inst0::INSTR (VXI-11)
TCPIP0::169.254.2.30::5025::SOCKET (Sockets)
or host name:
TCPIP0::A-53230A-00050.keysight.com::inst0::INSTR
To Next Page
Loading...
