3 53220A/53230A Measurements
90 Keysight 53220A/53230A User’s Guide
GATE Start Delay
TIME
0.0 seconds
SENSe:GATE:STARt:DELay:SOURce
SENSe:GATE:STARt:DELay:TIME
GATE Stop Source IMMediate SENSe:GATE:STOP:SOURce
GATE Stop Holdoff
TIME
0.0 seconds
SENSe:GATE:STOP:HOLDoff:SOURce
SENSe:GATE:STOP:HOLDoff:TIME
GATE Stop Slope NEGative SENSe:GATE:STOP:SLOPe
External Gate Source Gate In/Out BNC OUTPut:STATe
Burst Gate Auto On (enabled) SENSe:FREQuency:BURSt:GATE:AUTO
Burst Gate Delay 0.0 seconds SENSe:FREQuency:BURSt:GATE:DELay
Burst Gate Time 1.0 us SENSe:FREQuency:BURSt:GATE:TIME
Narrow Pulse Mode Off (disabled) SENSe:FREQuency:BURSt:GATE:NARRow
Math
Graphics
Disabled, including the individual calculate
functions. Other parameters are unchanged.
CALCulate1 subsystem
CALCulate2 subsystem
Auto-level Frequency Unchanged SYSTem:ALEVel:FREQuency
Measurement Timeout Unchanged SYSTem:TIMeout
Reference oscillator
Unchanged from previous settings.
SENSe:ROSCillator:SOURce
SENSe:ROSCillator:SOURce:AUTO
SENSe:ROSCillator:EXTernal:FREQuency
Reading Format
Data Storage
Instrument Status
Unchanged from previous settings.
Unchanged from previous settings.
Unchanged from previous settings.
FORMat Subsystem
DATA Subsystem
STATus Subsystem
Table 3-2 Counter configuration using CONFigure and MEASure (continued)
Parameter CONFigure/MEASure Setting Low-Level Command/Subsystem
To Next Page
Loading...
