Keysight ENA Series User Manual

16 Keysight E5092A ENA Series Configurable Multiport Test Set
Performance Tests
Introduction
2-
Test Equipment Required
The test equipment required to perform the entire performance test procedure
is listed below.
Test Equipment:
Table 2-1 The E5092A performance test procedure
Para. Title
1 DC Source Output Voltage Accuracy Test
2 DC Source Maximum Current Test
3 Load Match, Insertion Loss, and Isolation Test for Switch 1
(SP4T, Port 1, 1A, 1B, 1C and 1D)
4 Load Match, Insertion Loss, and Isolation Test for Switch 2
(SP4T, Port 2, 2A, 2B, 2C and 2D)
5 Load Match, Insertion Loss, and Isolation Test for Switch 3
(SP4T, Port 3, 3A, 3B, 3C and 3D)
6 Load Match, Insertion Loss, and Isolation Test for Switch 4
(SP4T, Port 4, 4A, 4B, 4C and 4D)
7 Load Match, Insertion Loss, and Isolation Test for Switch 5
(SPDT, 5COM, 5A and 5B)
8 Load Match, Insertion Loss, and Isolation Test for Switch 6
(SPDT, 6COM, 6A and 6B)
9 Load Match, Insertion Loss, and Isolation Test for Switch 7
(SPDT, 7COM, 7A and 7B)
10 Load Match, Insertion Loss, and Isolation Test for Switch 8
(SPDT, 8COM, 8A and 8B)
11 Load Match, Insertion Loss, and Isolation Test for Switch 9
(SPDT, 9COM, 9A and 9B)
12 Load Match, Insertion Loss, and Isolation Test for Switch 10
(SPDT, 10COM, 10A and 10B)
13 Control Line Maximum Current Test
Network Analyzer Keysight N5230A Opt. 240 or 245
Calibration kit Keysight 85052D

Keysight ENA Series Specifications

General

Brand	Keysight
Model	ENA Series
Category	Measuring Instruments
Language	English