Driving your vehicle
1126
Blind-Spot Collision-Avoidance Assist (BCA)
Stopping vehicle and ending brake
control
䳜 When the vehicle is stopped due
to emergency braking, the 䳒Drive
carefully䳓 warning message will
appear on the cluster.
䳜 For your safety, the driver should
depress the brake pedal immedi
-
ately and check the surroundings.
䳜 Brake control will end after the
vehicle is stopped by emergency
braking for approximately 2 sec
-
onds.
䳜 For your safety, change the
settings after parking the vehicle
at a safe location.
䳜 If any other function䳓s warning
message is displayed or audible
warning is generated, Blind-Spot
Safety system䳓s warning mes
-
sage may not be displayed and
audible warning may not be gen
-
erated.
䳜 You may not hear the warning
sound of Blind-Spot Safety sys
-
tem if the surrounding is noisy.
䳜 Blind-Spot Safety system may
not operate if the driver applies
the brake pedal to avoid collision.
䳜 When Blind-Spot Safety system is
operating, braking control by the
function will automatically cancel
when the driver excessively
depresses the accelerator pedal
or sharply steers the vehicle.
䳜 If changing the gear quickly during
reversing the vehicle, Blind-Spot
Safety system may not work or
may operate unnecessarily.
䳜 During Blind-Spot Safety system
operation, the vehicle may stop
suddenly injuring passengers and
shifting loose objects. Always
have the seat belt on and keep
loose objects secured.
䳜 Even if there is a problem with
Blind-Spot Safety system, the
vehicle䳓s basic braking perfor
-
mance will operate normally.
䳜 Blind-Spot Safety system does
not operate in all situations or
cannot avoid all collisions.
䳜 Blind-Spot Safety system may
warn the driver late or may not
warn the driver depending on the
road and driving conditions.
To Next Page
Loading...
