Kobold VK200 - GETTING STARTED

Getting started18 19
2 GETTING STARTED
In this chapter you will learn how to set up your
Kobold VK200 Upright Vacuum Cleaner for use. You
will get to know the basic functions of your Upright
Vacuum Cleaner and how to use it properly.
2.1 MOUNTING THE TELESCOPIC
HANDLE
The telescopic handle is not attached to the Kobold
VK200 Upright Vacuum Cleaner on delivery. Pro-
ceed as follows to attach the telescopic handle to the
Upright Vacuum Cleaner:
It is recommended to attach an accessory
head before inserting the telescopic handle. For
instructions on mounting an accessory head, see
chapter ”2.3 Attaching the accessory head” on
page 22.
1. Fully unfold the clamping lever
and hold it.
2. Insert the telescopic handle into the opening
of the Upright Vacuum Cleaner as far as the
stop point, where you will feel it engage.
3. Close the clamping lever
.
Now the telescopic handle is firmly secured to the
Upright Vacuum Cleaner and cannot be released.
2
1
1.
3
2.