3.4.10 AFTER USING THE KOBOLD SP600
STORING THE KOBOLD SP600
NOTE
Risk of damage from improper use!
• When storing the device, never leave residual
fluid in the tank. Empty the tank fully after each
use.
1. Once you have finished cleaning, remove the
tank from the SP600 as described in the chapter
“Removing, filling and inserting the tank” on
page 57.
2. Empty the tank.
3. Put the empty tank back in the SP600.
4. Remove the cloth holder from the SP600 and
take off the cleaning cloth as described in the
chapter “Releasing the cloth holder from the
Kobold SP600” on page 54.
5. Store the SP600 with the tank inside and the
cloth holder until you need them again.
CLEANING THE KOBOLD MF600 CLEANING
CLOTHS
1. Wash dirty cleaning cloths in the washing ma-
chine at 60 °C without fabric softener. The cloths
must never be washed with chlorine bleaching
agents.
2. The cleaning cloths can be tumble-dried on a low
setting.
To Next Page
Loading...
