Kobold VK200 - How to View the Video for Mounting the Power Cord

Getting started20 21
4. Fully unfold the clamping lever
again.
Hold it in the downward position.
Using the handle, push the yellow collar
down
towards the vacuum cleaner.
Push down firmly on the handle until you hear
an audible ‘click’.
5. Remove the collar
.
6. Slide the telescopic handle down fully into the
Upright Vacuum Cleaner.
The power cord is now correctly inserted and the
VK200 Upright Vacuum Cleaner is ready for use.
Once it is inserted, leave the power cord in
the device permanently. Only remove the power
cord if you need to replace it (see “4.2.3 Remov-
ing the power cord from the Kobold VK200
Upright Vacuum Cleaner” on page 91).
2.2.2 HOW TO VIEW THE VIDEO FOR
MOUNTING THE POWER CORD
To view this procedure online, please scan the QR
code with your smartphone or tablet which will take
you to an instructional video.
Or visit
www.kobold-worldwide.com/vk200/
click
4.
5.
6.
1
4
4