Kobold VK200 - ATTACHING THE ACCESSORY HEAD; REMOVING AND REPLACING THE ACCESSORY HEAD

Getting started22 23
2.3 ATTACHING THE ACCESSORY
HEAD
You can use the following accessory heads to clean
your floor:
– Kobold EB400 Automatic Electric Brush
– Kobold VF200 Carpet Freshener
– Kobold SP600
– Kobold HD60 Hard Floor Nozzle
The attachment process is the same for all four
accessory heads:
1. Connect the attachment socket
of the Upright
Vacuum Cleaner to the pivot on the accessory
head
.
2. Make sure you hear the attachment socket click
into the pivot.
2.4 REMOVING AND REPLACING
THE ACCESSORY HEAD
To remove the accessory head from your Kobold
VK200 Upright Vacuum Cleaner, you have two
options:
1. Unlock the accessory head at the top of the tele-
scopic handle by sliding the switch
up.
or
2. Push the switch at the bottom of the suction port
up to unlock the accessory head .
Once it is unlocked, you can remove the accessory
head from the Upright Vacuum Cleaner.
EB400
2
1
EB400
EB400
3
1
2