Kobold VK200 - Rolling the Kobold VK200 Upright Vacuum Cleaner; Putting the Device in Power Setting; Hanging up on the Wall

Getting started25
2.5.2 ROLLING THE KOBOLD VK200 UPRIGHT
VACUUM CLEANER
You can conveniently roll the device in the standby
position
to freely move it:
1. In the standby position, tilt the device backwards
so it stands on the rollers.
2. Move it in the desired direction on the rollers .
2.5.3 PUTTING THE DEVICE IN POWER
SETTING
In the power setting, the Upright Vacuum Cleaner
can be moved freely and the device can be steered in
all directions on the floor.
1. Hold the accessory head firmly in place with
your foot
and tilt the telescopic handle back
so that you hear it disengage from the standby
position.
Now the accessory head can be moved in all direc-
tions again.
2.5.4 HANGING UP ON THE WALL
You can hang the Upright Vacuum Cleaner on the
wall to store it.
1. Leave the device in the power setting.
2. With the upper opening of the cable hook
,
hang the device on the wall.
The accessory head hangs down
.
1
2
3
1
2
2
3