Maintenance92 93
4.3 KOBOLD EB400 AUTOMATIC
ELECTRIC BRUSH
WARNING
Risk of electric shock!
• Always switch the device off before all retrofit-
ting, cleaning and maintenance work and dis-
connect the mains plug from the socket.
CAUTION
Pinching hazard!
• Stay clear of the moving parts on the Kobold
EB400 Automatic Electric Brush.
4.3.1 CHECKING AND CLEANING
1. Check the underside every once in a while to
prevent damage to the device and floor.
2. Perform visual inspections from time to time in
order to detect defects or very dirty areas.
3. A dirty sensor
can simply be vacuumed.
Do not insert any sharp objects into the sensor
shaft.
To Next Page
Loading...
