2.2 MAINS CONNECTION
2.2.1 ATTACHING THE POWER CORD
WARNING
Risk of electric shock!
Disconnect the plug from the mains socket
before attaching the power cord.
A yellow collar is included with your Kobold
VK200 Upright Vacuum Cleaner. Please follow the
below instructions to attach the power cord cor-
rectly.
Before using the Kobold VK200 Upright Vacuum
Cleaner for the first time, attach the power cord as
follows:
1. Fully unfold the clamping lever
.
Pull the telescopic handle
out slightly.
Push up on the clamping lever
to secure the
handle in place.
2. Feed the power cord
through the opening at
the end of the telescopic handle with the clip fac-
ing to the left.
Thread the power cord in slightly.
The cord will visibly run down the length of the
handle to the base where it meets the main body of
the VK200 Upright Vacuum Cleaner.
3. Secure the yellow collar
above the power cord
on the telescopic handle.
The arrow on the yellow collar should be facing
downwards.
2.
3.
1.
1
2
3
4
3
To Next Page
Loading...
