Kobold VK200 - Filling the Dosage Hopper; Kobosan Active Dosage

Operation43
3.2.2 FILLING THE DOSAGE HOPPER
The removable dosage hopper is installed inside the
Carpet Freshener.
1. Insert the dosage hopper
into the Carpet
Freshener
. Make sure that distribution is de-
activated first (switch
is up).
2. Open the cover of the dosage hopper by
pushing it forward slightly and then lifting it
out.
3. Add the desired amount of Kobosan Active maxi-
mum 500g) evenly to the dosage hopper
.
4. Close the dosage hopper (put the cover on
and slide it closed).
3.2.3 KOBOSAN ACTIVE DOSAGE
1. Operate Kobosan Active dosage with the foot
switch
.
– Switch up:
Kobosan Active distribution = deactivated
.
– Switch down:
Kobosan Active distribution = activated
.
2. Switch the vacuum cleaner to the power perfor-
mance level auto.
The suction motor starts and drives the brush of
the Carpet Freshener. Kobosan Active is brushed
directly into the carpet.
3. Move the Carpet Freshener back and forth in ad-
jacent passes.
4. For a normal level of dirt you optimally cover the
area of the carpet with Kobosan Active by travel-
ling over it once.
5. After one pass over the area being cleaned, deac-
tivate the dosage hopper by pressing the foot
switch
.
The dosage hopper does not have to be deac-
tivated if it is empty.
VF200
1
2
3
4
VF200
1
2
3