2.8 SWITCHING THE DEVICE
ON AND OFF, SETTING THE
POWER PERFORMANCE
LEVEL
2.8.1 SWITCHING ON
1. Switch the Kobold VK200 Upright Vacuum
Cleaner on by sliding the main switch
from
position
forwards .
2.8.2 SETTING THE POWER PERFORMANCE
LEVEL
In general, we recommend power performance level
auto (automatic suction power).
When the Kobold EB400 Automatic
Electric
Brush is used, the suction power is regulated
automatically if the power performance level
‘auto’ has been set using the main switch
.
1. To manually set the suction power levels with
the main switch
, proceed as follows:
auto automatic suction power (recommended)
soft minimum power
med medium power
max maximum power
We recommend vacuuming with the power
performance level auto when using all accessory
parts. The other power levels are specially
intended for specific uses. You will find these in
the chapters on the accessory parts.
3
1
2
To Next Page
Loading...
