Kobold VK200 - Winding up and Unwinding the Power Cord; Connecting the Power Cord

Getting started21
2.2.3 WINDING UP AND UNWINDING THE
POWER CORD
WARNING
Risk of electric shock!
• Pull the mains plug from the socket before
winding up the power cord!
CAUTION
Danger of damaging electrical parts!
• Make sure the device and power cord are not
damaged during winding up.
Wind up the power cord when you have finished
using the Upright Vacuum Cleaner.
1. Wind the power cord
around the cable hook
on the Upright Vacuum Cleaner and around
the cable hook on the handle
.
Unwind the power cord when you want to use the
Upright Vacuum Cleaner.
2. To unwind the power cord, turn the cable hook
to the side (I.)
The power cable is released from the cord wrap.
3. Now turn the cable hook
back to the vertical
position.
2.2.4 CONNECTING THE POWER CORD
1. Connect the mains plug to the socket.
1
3
2
2
I.