Getting started24 25
You can only place the Upright Vacuum Cleaner in
standby position when it is centred.
1. To centre it, turn both the Upright Vacuum Cleaner
and the accessory head, e.g. the Automatic
Electric
Brush
, at the pivot to face straight ahead.
Now you can place it in the standby position.
2. Move the telescopic handle forward
until it
stands upright and you can hear it click into the
pivot
.
3. If you will not be using your Upright Vacuum
Cleaner for some time, disconnect the mains
plug and store the device properly.
If you put the Kobold VK200 Upright Vacuum
Cleaner with the Kobold EB400 Automatic Electric
Brush, the Kobold VF200 Carpet Freshener or the
Kobold SP600 into the standby position and have
not switched it off via the main switch, the
Upright Vacuum Cleaner automatically switches
off the fan, and the brush of the EB400/VF200 or
the cloth holder of the SP600 will stop. The filter
fill level indicator and the control lights of the
accessory head stay lit.
2
3
EB400
1
To Next Page
Loading...
