Maintenance90 91
NOTE
Risk of damage from improper use!
• Only use the Upright Vacuum Cleaner with the
motor protection filter inserted.
REMOVING THE MOTOR PROTECTION FILTER
The motor protection filter
is held in two places
in the filter compartment of the Upright Vacuum
Cleaner
and .
1. Take hold of the flap
and pull it downwards
while also pulling it towards you.
The locking mechanism disengages and the filter
can be removed.
CLEANING THE MOTOR PROTECTION FILTER
NOTE
Risk of damage from improper use!
• Do not clean the Kobold VK200 motor protection
filter with water or other fluids.
1. Vacuum the motor protection filter from both
sides.
REPLACING THE MOTOR PROTECTION FILTER
1. If the motor protection filter has been damaged
or is extremely dirty, insert a new one.
The Motor protection filter can be purchased
from the Mail Order Hotline (see chapter
“8 Services” on page 116).
Motor protection filters can also be obtained
at our online shop at www.vorwerk.co.uk
2
2
1
3
To Next Page
Loading...
