Maintenance94 95
CLEANING THE ROLLER BRUSH
NOTE
Risk of damage to the device due to improper
cleaning!
• Never wet clean the roller brush.
The roller brush is not dishwasher safe nor
waterproof.
1. Remove lint, hair and other dirt from the roller
brush.
2. Hair can be cut with scissors along the slots
.
3. Make sure that the green cap and the metal cup
and ball bearing
of the roller brush under-
neath the cap are not loosened.
REINSTALLING THE ROLLER BRUSH
NOTE
Risk of damage from improper use!
• If the green cap has been removed, ensure that
the small metal ball bearing fits correctly. Other-
wise the bearing may be damaged.
1. Set the brush
with the black side onto the
Torx® cam
. The green side is inserted on the
opposite side
.
2. Place the floor plate under the green sealing
lip
and swivel it round to the middle of the
device, until both locking bolts
audibly lock.
Roller brushes can be purchased from the
Mail Order Hotline (see chapter “8 Services”
on page 116).
Roller brushes can be purchased from the
Mail Order Hotline (see chapter “8 Services”
on page 116).
1
2
2
3
1
6
4
5
To Next Page
Loading...
