Kolida KTS440 R Series User Manual

133
18.11 Deleting Codes
·It is possible to clear codes from memory.
PROCEDURE
Operating Procedure Operation Display
Select “3. Code” in the “Memory Mode ⑴
Screen” and press ENT (or press numeric
key 3), the “Code menu screen” is displayed.
“3. Code”
+
ENT
Mem./Code
1. Key in code
2. Code deletion
3. Code view
4. Clear list
⑵ Select “2. Code deletion” and press ENT (or
press numeric key 2). The “Code deletion
screen” is displayed.
“2. Code
deletion ”
+
ENT
Mem./Code
ABCDEFGHIJKLMNO
A001
TREE0LEET
POINT1 ↓
↑↓P TOP LAST DEL
⑶Align the cursor with the code to be deleted
and press DEL to delete it.
·Move item: ▲or▼
·Changing the cursor motion unit: ↑↓P
·When ↑↓P is displayed, the cursor moves from
line to line.
·When ↑↓P is displayed, the cursor moves from
page to page.
·Display top of code: TOP
·Display end of code: LAST
Press ESC to end operating and restore to
“Code Menu Screen.”
DEL
+
ESC
Mem./Code
1. Key in code
2. Code deletion
3. Code view
4. Clear list

Kolida KTS440 R Series Specifications

General

Brand	Kolida
Model	KTS440 R Series
Category	Measuring Instruments
Language	English