6
5. Abundant Surveying Programs
Except for the basic surveying modes (angle, distance, coordinate measurement), KTS-440
provides special surveying programs, for example, REM, Offset, MLM, Staking-out, etc, to
meet the demand of professional survey.
2. PRECAUTIONS
1． Never place KTS directly on the ground. Sand or dust may cause damage to the screw
holes or the centering screw on the base plate.
2． Before operating, inspect the power, functions and indications of the instrument as well its
initial setting and correction parameters.
3． When working in a sun-baked (rainy or wet) day, please use a surveying umbrella to avoid
damage. Besides, do not aim the telescope at the sun without a filter.
4． When not using the instrument, place it in the case and avoid shock, dust and humidity.
5． If there is great difference between the temperature in working area and that in store place,
leave the instrument in the case till it fits the temperature of environment outside.
6． Clean its surface with a woolen cloth when finishing use. If wet, dry it immediately before
turning on it.
7． Turn the power off before removing the battery, otherwise it may cause damage to internal
circuit. When place KTS into its case, firstly remove the battery and place it in the case in
accordance with its layout plan. Make sure that the inside of the carrying case and KTS are
dry before closing the case.
8． No used for a long time, remove the battery for separated store. The battery should be
charged once a month.
9． Clean exposed optical parts with degreased cotton or lens tissue only!
10． During transporting should be placed in its carrying case, cushioned materiait is
recommended to be used around the case for support.
11． Unless you are a maintenance specialist, do not attempt to disassemble the instrument by
yourself even if you find it abnormal.
12. Never aim at eyes with the laser beam of KTS440R Series Total Station.
To Next Page
Loading...
Need help?
General
