Kolida KTS440 R Series User Manual

30
7.6 Setting LCD Contrast
·From “7.5 Setting Instrument Constant”, set the contrast of LCD.
PROCEDURE
Operating Procedure Operation Display
⑴ From Status Mode Press Config to enter
config mode. Config
Config
1. Obs. Condition
2. Instr. const
3. Date & time
4. Comms setup
5. Unit
6.Key function
⑵ After selecting “2. Instr const”, press ENT
(Press numeric key 2 is also ok) to enter
instrument constant setting screen.
“2.
Instrument
constant”
+
ENT
Instr. const：
1. V0/ AXIS CONST
2. V0 Adjustment
3. Collimation
4.Horizontal Axis
5. Instr. Const.
6. Contrast Adj.
⑶ Select “3. Contrast ADJ” press ENT (Press
numeric key 3 is also ok) to enter contrast
adjustment screen.
“3.
Contrast
ADJ”
+
ENT
Contrast adjustment
Level ： 6
↑ ↓
⑷ Press F2 or F3 to adjust contrast.
F2or F3
Contrast adjustment
Level ： 5
↑ ↓

Kolida KTS440 R Series Specifications

General

Brand	Kolida
Model	KTS440 R Series
Category	Measuring Instruments
Language	English