Krone EasyCut F 320 - Page 83

Index 18
Original Operating Instructions 150000802_00_en 83
S
Safely performing oil level check, oil change and
filter element change .......................................... 24
Safety ................................................................. 12
Safety device front.............................................. 43
Safety labels on the machine ............................. 24
Safety markings on the machine ........................ 17
Safety routines ................................................... 23
Scope of the document ........................................ 7
Securing raised machine and machine parts
against lowering ................................................. 23
Service life of the machine ................................. 12
Setting high-cut skids ......................................... 52
Setting the cutting height.................................... 51
Settings .............................................................. 51
Shutting down and safeguarding the machine ... 23
Side guard - for the “series” version ................... 45
Sources of danger on the machine .................... 20
Staff qualification ................................................ 13
Start-up............................................................... 38
Storage............................................................... 77
Structural modifications on the machine ............ 13
Support jack ....................................................... 46
Switching off the machine .................................. 50
T
Target group of this document ............................. 6
Technical data .................................................... 32
Technical limit values ......................................... 15
Technically sound state of the machine ............. 14
Term “machine” .................................................... 7
Tightening torques.............................................. 55
Top link pin ......................................................... 36
U
Unattended parking ............................................ 18
Unsuitable consumables .................................... 19
V
Validity.................................................................. 6
Venting the friction clutch ................................... 58
W
Warning signs....................................................... 8
Warnings of property damage/environmental
damage ................................................................ 9
Waste disposal ................................................... 79