02/HANDLEBAR, INSTRUMENTS 28
– Adjust the play in the throttle cable. ( p. 28)
6.4Adjusting the play in the throttle cable
600631-10
– Move the handlebar to the straight-ahead position.
– Use the KTM diagnostics tool to set the motor drive to the basic position.
– Loosen counter nut .
– Set the play in the throttle cable by turning the adjusting screw .
Guideline
Throttle cable play 3… 5 mm (0.12… 0.2 in)
– Tighten counter nut .
To Next Page
Loading...
