KTM 2008 690 SMC EU - Removing Clutch Cover; Removing Spacer and Spring; Removing Spark Plug

30/DISASSEMBLING THE ENGINE 97
300013-10
– Remove screw . Take off the water pump wheel .
– Take off the water pump cover seal.
Info
Do not lose the centering pins.
300014-10
– Remove the shaped washer .
17.12Removing clutch cover
300015-10
– Remove screws . Take off the clutch cover.
– Take off the dowels. Remove the clutch cover seal.
17.13Removing spacer and spring
300154-10
– Remove the spacer  and spring  of the shift shaft.
17.14Removing spark plug
300016-10
– Remove the spark plug using the special tool .
Spark plug wrench (75029172000) ( p. 216)