KTM 2008 690 SMC EU - Installing the Shock Absorber

04/SHOCK ABSORBER, SWINGARM 33
300565-10
– Loosen screw .
– Remove screw .
– Remove screw .
300566-10
– Swing the rear end upwards.
– Lift shock absorber  upwards and remove.
7.10Installing the shock absorber
300566-11
– Swing the rear end upwards and insert shock absorber  from above.
300565-11
– Mount screw  but do not tighten yet.
– Mount and tighten screw .
Guideline
Screw, bottom shock
absorber
M10 45 Nm
(33.2 lbf ft)
Loctite
®
243™
– Tighten screw .
Guideline
Screw, top shock absorber M10 45 Nm
(33.2 lbf ft)
Loctite
®
243™