04/SHOCK ABSORBER, SWINGARM 34
300564-11
– Mount and tighten screw .
Guideline
Screw, fuel tank, bottom M8 20 Nm
(14.8 lbf ft)
– Repeat the operation on the opposite side.
300563-11
– Lift the rear fairing.
– Mount and tighten screws .
Guideline
Screw, main silencer
holder on fuel tank
M8 25 Nm
(18.4 lbf ft)
Loctite
®
243™
300562-11
– Mount and tighten screws .
Guideline
Screw, side cover M5 2 Nm (1.5 lbf ft)
– Mount the side cover. ( p. 55)
– Remove the motorcycle from the work stand. ( p. 10)
7.11Servicing the shock absorber
Danger
Danger of accidents Disassembly of pressurized parts can lead to injury.
– The shock absorber is filled with high density nitrogen. Adhere to the description provided.
Condition
The shock absorber has been removed.
201239-01
– Remove the spring. ( p. 35)
– Dismantle the damper. ( p. 35)
– Disassemble the piston rod. ( p. 36)
– Check the damper. ( p. 37)
– Remove the heim joint. ( p. 38)
– Install the heim joint. ( p. 39)
–
Assemble the piston rod. ( p. 40)
– Assemble the damper. ( p. 41)
– Install the spring. ( p. 45)
To Next Page
Loading...
