30/DISASSEMBLING THE ENGINE 94
17.1Clamping engine into engine work stand
300144-10
– Mount special tool on engine work stand .
Engine work stand (61229001000) ( p. 211)
Support for engine work stand (75012001060) ( p. 212)
Holder for engine work stand (75012001070) ( p. 212)
– Mount the engine on special tool .
Info
Have an assistant help you or use a crane.
17.2Draining the engine oil
300002-10
– Remove the oil drain plug with the magnet and seal ring.
– Remove plug with oil screen and the O-rings.
300161-10
– Remove plug with oil screen and the O-rings.
– Completely drain the engine oil.
17.3Removing starter motor
300001-01
– Remove screws . Take off the starter motor.
17.4Removing valve cover
300003-10
– Remove screws . Take off the valve cover with the valve cover seal.
To Next Page
Loading...
