109 / 151Issued: 16.06.2010 Version: MA KL 1500-3 T S 141215 V1 en
14. Options
4. Mount the holder (>>> Fig. 14-2) and fasten it with M12x30 Allen screws.
5. Insert 8x24 roll pins.
6. Mount the position switches on the holder, and check the installation posi-
tion of the actuating levers.
Fig. 14-2: Brackets and cams
1 Cam 6 Roll pin
2 Bracket 7 Holder
3 Weld seam 8 Position switch
4Track 9Beam
5 Allen screw
Fig. 14-3: Installation dimensions
1 Energy supply chain side
2 Drive side
To Next Page
Loading...