ExpressionMate ROM Setups
Setup Descriptions
121
28. Seq Cntrl - Section 1 sends volume, 2 pan, 3 tempo. SW1
on sends Seq. start, press again sends seq. stop. SW2 sends seq.
continue press again sends seq. stop.
29. KDFX Cntrl - Ribbon sections send MMsg for KDFX
users. SW sends note on C4 for live mode.
30. K25 Bends - The ribbon sends all three K2500 pitch bend
controllers: section 1 pitch bend, section 2 aux bend 1, sect 3
aux bend 2.
31. Data+/D-/Not - Section 1 sends data -, sect 2 sends data +,
sect 3 sends chromatic scale. SW also send data+ and data -.
32, 64. BLANK - No parameters are set to any values.
33–63. FACT DEFAULT - These Setups are good starting
points for your own Setups. Parameters are set to reasonable
values.
To Next Page
Loading...
