KW Aufzugstechnik GmbH OPERATING MANUAL DAVID-613
DAVID-D613-V125-E 13.04.2021 Page - 235 -
Enter value and change OFF, 2 to 500 cm; Can be
changed later - possible in inspection mode or re-
turn to safe condition
Vnenn: 1,6 m/s -> 300 cm
Vnenn: 2,0 m/s -> 350 cm
ANTSsafe Delay Contro Top has been saved!
Note: (setup-3 means that all ASA parameters
have been configured but no floors have been
learned into the ASA)
Note: If DSK is active, i. the floors have already
been taught-in in the D613 and the flush levels are
set then: ENTER ->STEP-3 key otherwise: DOWN
3.8 STEP-2: D613-Learn leves and adjust levels
Two methods can be selected for learning floors, in the B43 menu learning floors:
To Next Page
Loading...