KYMCO MX 125 - Final Reduction;Transmission System; Service Information; Troubleshooting

10. FINAL REDUCTION/
TRANSMISSION SYSTEM
10-2
MX’er SYSTEM
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• When replacing the drive shaft, use a special tool to hold the bearing inner race for this operation.
SPECIFICATIONS
Specified Oil: GEAR OIL SAE 90#
Oil Capacity: At change : 0.2 liter
At disassembly : 0.4 liter
TORQUE VALUES
Transmission case cover bolt 0.81.2kgf-m
SPECIAL TOOLS
Flywheel holder E021
Flywheel puller E005
Lock nut socket wrench E009
TROUBLESHOOTING
Engine starts but motorcycle won‘t move
• Damaged transmission
• Seized or burnt transmission
Oil leaks
• Oil too rich
• Worn or damaged oil seal