KYMCO MX 125 - Air Filter for Drive Belt

3. INSPECTION/ADJUSTMENT
3-4
MX’er SYSTEM
Use parts cleaning solvent only. Never
use gasoline or low flash point solvents
which may lead to a fire or explosion.

Squeeze the excess solvent out of the
element and let dry.
Apply the engine oil.
Squeeze out the excess oil.
CHANGE INTERVAL
More frequent replacement is required when
riding in unusually dusty or rainy areas.
AIR FILTER FOR DRIVE BELT
Remove the front cover.
Remove the screw, air filter case and air
filter element.
Inspect the air filter element.
Replace if damage.
Do not twist or wring out the foam
element. This could damage the foam
material.

The element should be wet but not
dri
pp
in
g
.

Air Cleaner Elemen
t
Front cove
r
Air Filter Case
Clean air filter element steps:
Tap the element lightly to remove most of
Screw