KYMCO SR25BA - Page 60

5. Fi INJECTION SYSTEM MOVIE S 125i
5-8
DTC Code List
Blink Failure
Codes
Fault description Priority Fault management
5 P1122 Throttle position sensor
movement speed
p
roble
m
2
1.Make sure if the connector of Throttle position sensor is
connected correctly.
2.Check if theThrottle position sensor is adjusted.
6 P0560 Battery voltage
malfunction
1
1. Check if the battery voltage is lower or higher.
2.Check if the charge system is malfunction.
7 P0110 Inlet air temperature
sensor or electric circuit
malfunction
2
1. Check if the connector of Inlet air temperature
sensor loosen.
2.Check if the resistance of sensor is normal
.
8 P0410 Idle air valve or electric
circuit malfunction
2
1. Check if the connector of Idle air valve
loosen.
2.Check if the resistance of valve is normal.
9 P0505 Idle speed volume
control range
bl
2
1.Check if the opening angle is over 180
ٛ
for
Idle air valve.
2.Check if the opening angle is malfunction.
10 P0251 Injector or electric
circuit
bl
2
1.Check if the connector of Injector is loosen.
2.Check if the ECU send signal to Injector.
3.Check if the power source and resistance of Injector are
malfunction.