Kyocera Mita WP31C - Page 96

3.6 Making Default Settings
3-51
Printing Lists of Fonts
To help you decide in selecting a font, you can printout lists of the internal fonts or the
optional fonts including downloaded fonts. Samples for font lists are shown in Figure 3-8
on page 3-52.
1
11
1
Press the MENU key.
2
22
2
Press the U or V key repeatedly until Font > appears.
3
33
3
Press the Z key.
4
44
4
Press the U or V key repeatedly until >List of Internal Fonts or >List
of Option Fonts appears.
5
55
5
Press the ENTER key. A question mark (?) appears.
6
66
6
Press the ENTER key again. Processing appears, then Ready. The printer prints
out a list of fonts with a sample and font ID (number) for each of them. Sample lists
of fonts are shown in Figure 3-8 on the next page.
Font >
>List of
Internal Fonts
>List of
Internal Fonts?