Kyocera 458ci - Embedded Web Server RX

Installing and Setting up the Machine > Embedded Web Server RX
106
Embedded Web Server RX
If the machine is connected to the network, you can configure various settings using Embedded Web Server RX.
This section explains how to access Embedded Web Server RX, and how to change security settings and the host
name.
➡ Embedded Web Server RX User Guide
NOTE
To fully access the features of the Embedded Web Server RX pages, you must enter the user name and password
and log in. Entering the predefined administrator password allows the user to access all pages, including
Document Box, Address Book, and Settings on the navigation menu.
Settings that the administrator and general users can configure in Embedded Web Server RX are as follows.
NOTE
The fax function can be used on products equipped with fax capability. Here, information on the FAX settings has
been omitted.
➡ FAX Operation Guide
Setting Description Administrator General User
Device Information/
Remote Operation
The machine's structure can be checked. Yes Yes
Job Status Displays all device information, including print
and scan jobs, storing jobs, scheduled jobs, and
job log history.
Yes Yes
Document Box Add or delete document boxes, or delete
documents within a document box.
The logged in user may not be able to configure
some settings, depending on the privilege of the
user.
Yes Yes
Address Book Create, edit, or delete addresses and address
groups.
The logged in user may not be able to configure
some settings, depending on the privilege of the
user.
Yes Yes
Device Settings Configure the advanced settings of the machine. Yes No
Function Settings Configure the advanced function settings. Yes No
Network Settings Configure the network advanced settings. Yes No
Security Settings Configure the security advanced settings. Yes No
Management Settings Configure the advanced management settings. Yes No